Since 2009 the reference point for Wi-Fi in Italy
4G LTE 3G GSM MIMO 2x2 10dBi Yagi antenna with 10m cable - SMA Male connector
4G LTE 3G GSM MIMO 2x2 antenna
10dBi Yagi with 10m cable - SMA Male connector
It is an external directional MIMO* antenna for use with LTE (4G), 3G, DCS, GSM modems and cell towers with two antenna connectors. The antenna has a gain of 10 dBi.
The antenna was designed to work with LTE modems equipped with two antenna connectors, some cell phones, GSM, DCS, 3G modems and repeaters.
*MIMO (Multiple Input, Multiple Output): A technical solution that increases the bandwidth of wireless transmission with the use of multiple antennas (or antenna arrays) on both sides of the link.
Specifications
NOTICE: Drain holes must be at the bottom!
The distance between antennas operating in vertical and horizontal polarization, respectively, should be at least 40 cm.
Technical characteristics
MIMO | Yes |
Physical channels | Vertical and Horizontal |
Frequency band [MHz] | See: 698-960/1710-2700 Or: 698-960/1710-2700 |
Gain [dBi] | V:9.5 Or: 10 |
Opening (V) [°] | 55 |
Opening (O) [°] | 75 |
vswr extension | 698-806: <2 806-960 <1.5 1700-2500 <1.5 2500-2700 <2 |
Impedance [Ω] | 50 |
Polarization | V/O |
Maximum input power [W] | 50 |
connectors | 2x SMA Male |
Cable length [m] | 10 |
Maximum pole diameter [mm] | 40-50 |
Dimensions [mm] | Each antenna: 442x205x65 |
Weight kg] | 1 |
Data sheet
Specific References
No customer reviews for the moment.